Back to Shopping at NorthernBrewer.com

Need help wiht co2 and regulator

i bought this http://www.birdmanbrewing.com/taprite-c … ual-gauge/ i lost the instructions. I do not know how to hook it to my co2 tank right. any help would be great

What are you having trouble with? Just be sure a seal is in place before you connect. They typically come with a plastic washer.

He is referring to this washer you should replace it every time you change tanks or remove the regulator.

http://www.northernbrewer.com/shop/co2- ... asher.html
http://www.midwestsupplies.com/co2-leak-stopper.html

You could also use a more permanent item.

[quote=“Nighthawk”]http://www.midwestsupplies.com/co2-leak-stopper.html

You could also use a more permanent item.[/quote]
I most definitely prefer these to the washers.

[quote=“chuck”]He is referring to this washer you should replace it every time you change tanks or remove the regulator.

http://www.northernbrewer.com/shop/co2- ... asher.html[/quote]

When you get your tank filled, ask to buy some washers. The guy at my fire extinguisher shop gave me 3-4 of them when I asked. :slight_smile:

If NB is selling them for $.15, they probably cost $.01 when ordered by the 100’s.

Taprite regulators come with a built-in o-ring. A washer is not needed.

OP - to double check this, just look on the regulator in the part that screws onto the tank. If you see a black o-ring, you’re good to go.

Here’s a pic to illustrate what you’re looking for: http://www.homebrewtalk.com/f35/do-i-ne … nk-246681/

Back to Shopping at NorthernBrewer.com